|
Freud SD508 Super Dado 8-Inch Stack Dado |  | Artist: US Air Force Band of the Midwest
Brand: Freud
Category: Home Improvement
List Price: $337.50
Buy New: $199.99
as of 7/29/2010 22:50 CDT details
You Save: $137.51 (41%)
New (14) from $199.99
Seller: Amazon.com
Rating:  80 reviews
Sales Rank: 12662
Media: Tools & Hardware
Autographed: No
Memorabilia: No
Discs: 1
Shipping Weight (lbs): 10.8
Dimensions (in): 12.4 x 11.1 x 4.4
MPN: SD508
Model: SD508
UPC: 008925330455
EAN: 0008925330455
ASIN: B00004RK0P
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours
| |
| Features:
| • | Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish | | • | Cuts dado widths from 1/4" to 29/32".Includes a 3/32" chipper, ideal for cutting dados for today's undersized plywoods. | | • | Set includes two outer blades,six chippers, Dado Tips & Tricks DVD, shim set, and storage case. | | • | Cuts all composition material, plywood, hardwoods, and softwoods. | | • | Freud's Limited Lifetime Guarantee |
|
| View Collection:
|
| Accessories:
|
| Similar Items:
| |
| Editorial Reviews:
Amazon.com Product Description
Enhance the quality of your dadoes with Freud's SD508 Eight-Inch Super Dado Set with Anti-Kickback Design. Designed to produce smooth, chip-free dadoes and grooves every time, this set is designed to take on a wide range of materials, from hardwoods to laminates. For exceptional precision, the blade width can be adjusted in 1/32-inch increments, while the included shim set allows for even finer adjustments.Razor-Sharp Blades for Smooth, Splinter-Free Dadoes
The perfect dado set for the fine cabinetmaker or weekend woodworker, the Freud SD508 produces dadoes and grooves that meet with flush, even edges. So you can be assured of precise cuts every time, the set is equipped with precision-grade features, starting with two proprietary razor-sharp outside blades.These high-quality eight-inch, 24-tooth blades with 5/8-inch arbors cut dadoes and grooves that are clean, flat, and virtually splinter free. Cuts made by these blades are accurate the first time, saving you from making repeated passes over the same workpiece. Flexibility for Cutting Hardwoods, Veneers, and More
The Freud SD508 fits all table saws and radial-arm saws and accommodates a wide range of materials, so you can keep it on hand from project to project. Use it to create dadoes and grooves in hardwood, softwood, chip board, plywood, and laminate (not recommended for non-ferrous materials). Adjustable Dado and Shim Set for Achieving Perfect Width
Producing the perfect dado is often reliant upon finding the perfect blade width. Designed with that mind, this set virtually doubles the number of slot widths available. First, its adjustable dado allows exceptionally fine-tuned adjustments in 1/32-inch increments. It also features a handy shim set for those jobs that call for even finer blade-width adjustments. And for greater versatility, the set's six chippers include a unique 3/32-inch chipper along with four 1/8-inch chippers and one 1/16-inch chipper. These chippers' four-wing design is a step above the common two-wing design of most chippers. This means your chippers will work efficiently to remove waste material and smooth the edges of your work pieces. Anti-Kickback Design for Safe Operation
The quality of this dado set is enhanced by its anti-kickback design, which gives you an added margin of safety while you work. MicroGrain Carbide Tips for Long-Lasting Performance
So you can get maximum performance out of this set, the blade components are constructed with Freud's TiCo Hi-Density Carbide. This means the blades can withstand numerous sharpenings and still retain their superior precision. And a Tri-metal Brazing process gives the blades impact resistance, so they last for the long term without dulling (a condition that can cause torn wood and uneven cuts). About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is the only manufacturer of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt. By producing its own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more. This product is covered by Freud's Limited Lifetime Warranty. What's in the Box
Freud SD508 Eight-Inch Super Dado Set with Anti-Kickback Design, including two eight-inch blades (with 5/8-inch arbors), shim set, four 1/8-inch chippers, one 3/32-inch chipper, and one 1/16-inch chipper.
|
| Customer Reviews:
Showing reviews 1-5 of 80
 Chipped chippers, and a little too groovy June 1, 2010
J. Brown (Portland, OR)
I chose this dado set back in early 2003 based on the top reviews, and I am somewhat disappointed in the product. A substantial number of the carbide tips on both the outside blades and the chippers have imperfections and chips. The brazing is not as uniform as other saw blades I own. Some of the chippers were a little rusty. The cuts are decent, though note that the points of the ATB outer blades leave a fine but slightly deeper groove than the chippers at the extreme edge of the dado. Additionally, the chippers cut about 1/100 of an inch shallower than the outer blades, so I have to clean up every single cut when making a box joint. Freud makes a dedicated box joint set (SBOX8) that is great...as long as you're fine with 1/4 and 3/8 box joints.
 Problem solved February 12, 2010
D. Daisy
Initial Shipment was missing the 1/16" chipper. Customer service resolved the problem quickly received replacement in 3 days, no cost to me to return defective item.
Great Cut October 10, 2009
M. Morin
I've had this dado set for several years and used it on everything from maple to MDF to softwoods. Has worked great. Assortment of blade widths and shims allow very fine adustment of width. Gives a nice square bottom with sometimes very very slight grove at edges.
When using larger widths, can exceed length of being able to tighten arbor nut safetly on table saw. But this would be true for any stacked dado set.
Have used with both a Delta contractor and Unisaw. Works fine on both but clearly Unisaw handles the mass better when starting up.
Case is nothing to get excited about and have to be careful not to have carbide touching.
Would buy again.
-- Mark
 An expensive tool for special purposes March 31, 2009
Carlgo (Carmel Valley, CA)
1 out of 1 found this review helpful
My first dado cutter was an ancient Sears non-carbide wobble type. It was pretty useless, of course, and years later I sprung for this Freud set. It was somewhat cheaper than the Forrest product, so this is what I chose.
I am happy with the quality of these blades. They are extremely thick and rugged, obviously good quality. Mine had no trace of rust or damage.
They certainly do a nice and safe job. I cannot say that the bottoms are perfectly smooth, but they are flat. The side blades do a nice job of not splintering the wood. Needless to say that they are a huge step up from the usual beginner-level of dado cutting.
A warning to first-time users: dado blades are a pain to install, no matter the brand. To really get the widths set correctly you have to make a test cut, take it all apart, play with shims and do it again. Wide widths on underpowered saws have to be done in stages. You will want to do all of your grooves at one time and not switch back and forth. Dado cutting demands good planning and careful set-up.
I like the case. It is sturdy, easy to use and very useful.
Many woodworkers use various router set-ups to make grooves and there are times when that makes sense, but for those perfectly sized grooves and clean cuts nothing matches a good dado set. If you do this kind of work, then this set is a good choice. If you want to spend more, then certainly the Forrest dado set would be a very nice choice indeed.
Surprisingly, the blades and chippers lost that perfect sharpness in fairly short time. To be fair, I was using a lot of ply and particle board then, and they don't seem to have gotten any duller since. While they didn't stay as sharp as my other Freud blades, they still work fine, even in my under-powered table saw. Still, that and the not perfectly smooth groove bottoms lose this set a star.
I would like to find a place that could do a good job of sharpening and radiusing them. They look like they could be resharpened many times as the carbide is thick. This is all part of the Industrial Life, so we have to deal with it.
as good as they say?????? February 24, 2009
Dan Briggs (CA, USA)
0 out of 1 found this review helpful
I have this set in the 6" size, and the less expensive 8" in the professional series. While the 6" does seem to hold "slightly" tighter tolerances IT DOES NOT MAKE SMOOTHER BOTTOMS than the 8" set AND the tolerances are so tight on the shaft that sometimes it takes up to 30 mins. and lots of cussin, to get multiple chippers off the motor shaft. Save urself time and money with the 8" professional set........
Showing reviews 1-5 of 80
|
|
|
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME. | |
